User Name :  Password :
 
  Angle
  Channel
  Flat Bar
 
300 series properties

Physical
(Values appear as percentages.)
Type Tensile (ksi) Yield (ksi) Elongation Hardness (Brinell) Hardness (Rockwell B)
302 75 30 40% in 2" 183 88
304 75 30 40% in 2" 183 88
304L 70 30 40% in 2" 183 88
309 75 30 40% in 2" 217 95
309S 75 30 40% in 2" 217 95
310 75 30 40% in 2" 217 95
310S 75 30 40% in 2" 217 95
316 75 30 40% in 2" 217 95
316L 70 25 35% in 2" 217 95
317 75 30 35% in 2" 217 95
317L 75 30 35% in 2" 217 95
321 75 30 40% in 2" 183 88
347 75 30 40% in 2" 183 88


Chemical
(Values appear as percentages.)
Type C Mn P S Si Cr Ni Mo
302 0.15 max 2.00 max 0.045 max 0.030 max 1.00 max 17.00/19.00 8.00/10.00 --
304 0.08 max 2.00 max 0.045 max 0.030 max 1.00 max 18.00/20.00 8.00/10.50 --
304L 0.03 max 2.00 max 0.045 max 0.030 max 1.00 max 18.00/20.00 8.00/12.00 --
309 0.20 max 2.00 max 0.045 max 0.030 max 1.00 max 22.00/24.00 12.00/15.00 --
309S 0.08 max 2.00 max 0.045 max -- 1.00 max 22.00/24.00 -- --
310 0.25 max 2.00 max 0.045 max 0.030 max 1.5 max 24.00/26.00 19.00/22.00 --
310S 0.08 max 2.00 max 0.045 max 0.030 max 1.5 max 24.00/26.00 19.00/22.00 --
316 0.08 max 2.00 max 0.045 max 0.030 max 1.00 max 16.00/18.00 10.00/14.00 2.00/3.00
316L 0.03 max 2.00 max 0.045 max 0.030 max 1.00 max 16.00/18.00 10.00/14.00 2.00/3.00
317 0.08 max 2.00 max 0.045 max 0.030 max 1.00 max 18.00/20.00 11.00/15.00 3.00/4.00
317L 0.03 max 2.00 max 0.045 max 0.030 max 0.75 max 18.00/20.00 11.00/15.00 3.00/4.00
321 0.08 max 2.00 max 0.040 max 0.030 max 1.00 max 17.00/19.00 9.00/12.00 0.75/0.75
347 0.08 max 2.00 max 0.040 max 0.030 max 0.5/1.00 17.00/19.00 9.00/12.00 0.5/0.75


400 series properties

Physical
(Values appear as percentages.)
Type Tensile (ksi) Yield (ksi) Elongation Hardness (Brinell) Hardness (Rockwell B)
410 65 30 20% in 2" 217 95
410S 60 30 22% in 2" 183 88
416 75 40 30-25% in 2" -- 82
420 95 60 30-25% in 2" -- 82
430 65 30 22% in 2" 183 88


Chemical
(Values appear as percentages.)
Type C Mn P S N Si Cr Ni Mo
410 0.15 max 1.00 max 0.040 max 0.030 max -- 1.00 max 11.5/13.5 -- --
410S 0.08 max 0.30/0.65 0.030 max 0.010 max 0.060 max 0.15/0.50 12.00/12.60 0.20/0.55 0.20/0.55
416 0.15 max 1.25 max 0.060 max 0.15 min -- 1.00 max 12.00/14.00 -- --
420 0.15 min 1.00 max 0.040 max 0.030 max -- 1.00 max 12.00/14.00 -- --
430 0.15 max 1.00 max 0.040 max 0.030 max -- 1.00 max 16.00/18.00 -- --
440C 0.95/1.20 1.00 max 0.040 max 0.030 max -- 16.00/18.00 19.00/22.00 -- 0.75 max

Quality of Titanium :
Titanium Grade 1-4 is pure Titanium, the other grades are alloys. Pure Titanium is used due to its high corrosion resistance,
the alloys because of the extremely high strength to weight ratio. :
  • Grade 1. Pure Titanium, relatively low strength and high ductility.
  • Grade 2. The pure titanium most used. The best combination of strength, ductility and weldability.
  • Grade 3. High strength Titanium, used for Matrix-plates in shell and tube heat exchangers.
  • Grade 5. The most manufactured titanium alloy. Exceedingly high strength. High heat resistance.
  • Grade 7. Superior corrosion resistance in reducing and oxidizing environments.
  • Grade 9. Very high strength and corrosion resistance..
  • Grade 12. Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11.
  • Grade 23. Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant Applications

Technical Specifications

CHEMICAL, PHYSICAL AND MECHANICAL PROPERTIES
CHEMICAL COMPOSITION ASTM Grade
(Max. Values) 1 2 5 7 9 12 23
N, Nitrogen 0,03 0,03 0,05 0,03 0,02 0,03 0,03
C, Carbon 0,1 0,1 0,1 0,1 0,05 0,08 0,08
H, Hydrogen 0,015 0,015 0,0125 0,015 0,013 0,015 0,0125
Fe, Iron 0,2 0,3 0,4 0,3 0,25 0,3 0,25
O, Oxygen 0,18 0,25 0,20 0,25 0,12 0,25 0.13
Pd, Palladium -- -- -- 0,12-0,25 -- -- --
Al, Aluminum -- -- 5,5-6,75 -- 2,5-3,5 -- 5,5-6.5
Mo, Molybdenum -- -- -- -- -- 0,2-0,4 --
V, Vanadium -- -- 3,5-4,5 -- 2,0-3,0 -- 3,5-4,5
Ni, Nickel -- -- -- -- -- 0,6-0,9 --
Ti, Titanium Bal. Bal. Bal. Bal. Bal. Bal. Bal.
MECHANICAL PROPERTIES -- -- -- -- -- --
Tensile strength, min (Mpa) 240,00 345,00 895,00 345,00 620,00 483,00 828,00
Yield strength, 0,2% Offset, min (Mpa) 170,00 275,00 825,00 275,00 483,00 345,00 759,00
Elongation (in 4D, min, %) 24,00 20,00 10,00 20,00 15,00 18,00 10,00
Reduction of Area, min, % 30,00 30,00 25,00 30,00 25,00 25,00 15,00
Hardness * Interpolated Rb70 Rb80 Rc36 Rb80 Rc28 Rc17* --


Type Nickel Chromium Molybdenum Copper Iron Manganese Carbon Silicon Sulfur Cobalt Aluminum Titanium Tungsten Vanadium Phosp-
horus
Niobium+
Tantalum
Nickel 200 99.0
min
-- -- 0.25
max
0.40
max
0.35
max
0.15
max
0.35
max
0.010
max
-- -- -- -- -- -- --
Monel 400 63.0
min
-- -- 28.0-34.0 2.50
max
2.00
max
0.30
max
0.50
max
0.024
max
-- -- -- -- -- -- --
Inconel 600 72.0
min
14.0-17.0 -- 0.50
max
6.00-10.00 1.00
max
0.15
max
0.50
max
0.015
max
-- -- -- -- -- -- --
Inconel 601 58.0-63.0 21.0-25.0 -- 1.00
max
Bal. 1.00
max
0.10
max
0.50
max
0.015
max
-- 1.00-1.70 -- -- -- -- --
Inconel 625 58.0
min
20.00-23.00 8.00-10.00 -- 5.00
max
0.50
max
0.10
max
0.50
max
0.015
max
1.00
max
0.40max 0.40
max
-- -- 0.015
max
3.15-4.15
Incoloy 800 30.0-35.0 19.0-23.0 -- 0.75
max
39.50
min
1.50
max
0.10
max
1.00
max
0.015
max
-- 0.15-0.60 0.15-0.60 -- -- -- --
Incoloy 800H 30.0-35.0 19.0-23.0 -- 0.75
max
39.50
min
1.50
max
0.05-0.10 1.00
max
0.015
max
-- 0.15-0.60 0.15-0.60 -- -- -- --
Incoloy 800HT 30.0-35.0 19.0-23.0 -- 075
max
39.5
min
1.50
max
0.06-0.10 1.00
max
0.015
max
-- 0.85-1.20 0.25-0.60 -- -- -- --
Incoloy 803 32.0-37.0 25.0-29.0 -- 0.75
max
Bal. 1.50
max
0.06-0.10 1.00
max
0.015
max
-- 0.15-0.60 0.15-0.60 -- -- -- --
Incoloy 825 38.0-46.0 19.50-23.50 2.50-3.50 1.50-3.00 22.00
min
1.00
max
0.05
max
0.50
max
0.03
max
-- 0.20max 0.60-1.20 -- -- -- --
C-276 Bal. 14.50-16.50 15.00-17.00 -- 4.00-7.00 1.00
max
0.01
max
0.08
max
0.03
max
2.50
max
-- -- 3.00-4.50 0.35max 0.04
max
--
Alloy 020 32.00-38.00 19.00-21.00 2.00-3.00 3.00-4.00 Bal. 2.00
max
0.07
max
1.00
max
0.035
max
-- -- -- -- -- 0.045
max
8xC-1.00
 
   
 
Links Store Info Policy Get in touch
- Home
- About us
Contact Us
- Shipping & Returns
- Bank Details

- Disclaimer
- Terms of use
- Privacy Policy
Address :
21, Badrikasharam Building,
100 Khetwadi Main Road 4.,
Mumbai - 400004, India.

Tel: +91 022 6610 9295
                       6743 9151

Email : info@ssanglebar.com
Copyright 2012-2013, Steel Age (India), All Rights Reserved / Terms & Conditions Apply .